Every Single CalculatorOne place for every calculator
ΩPlumbing, HVAC and electrical

Pump horsepower calculator

Horsepower to pump water at a flow and head.

Example: You are checking whether a pump is in the right range for a job.

Your numbers

gpm
ft
%
Drawn from your numbers. It redraws as you type.
  • Power at the pump shaft0
  • Water horsepower0

How it is worked out

Horsepower = gallons per minute × head in feet ÷ (3,960 × efficiency)

A worked example

100 gpm against 50 feet is 1.26 water horsepower. At 70% efficiency the pump needs 1.8.

Good to know

  • Use the pump maker's curve to choose a pump. This is the arithmetic behind it.

How we know this calculator is right

Before this calculator went on the site, 3 answers were worked out separately from its code, by hand or straight from the formula above. Each time this page loads, your own browser runs the calculator on those same numbers and compares. Turn on JavaScript to see the comparison.

See every check
Numbers usedResultWorked out separatelyThis calculator

What this proves: the calculator does the arithmetic of the formula shown, correctly. What it cannot prove: your measurements, or figures such as coverage per bag, waste and spacing, which are typical starting values you can change. Go by the product label and your local code.

Used by: plumbers and pipefitters.