How it works
Each measurement is turned into inches, the two are added or subtracted, and the answer is turned back into feet, inches and the nearest sixteenth.
Inches = feet × 12 + inches + fraction
A worked example
8 feet 5½ inches is 101.5 inches. 3 feet 9¾ inches is 45.75 inches. Added together they make 147.25 inches, which is 12 feet 3¼ inches. Subtract the second from the first and you get 55.75 inches, or 4 feet 7¾ inches.
Where this saves time
- Adding up several cuts to see whether they fit in one board.
- Finding the centre of a wall: enter the wall length and multiply by 0.5.
- Taking a door or window opening out of a wall length.
- Converting a tape reading to decimal feet for an area calculation.
Common questions
Why sixteenths?
A standard tape measure is marked in sixteenths of an inch, so that is the finest reading most people can take or cut to. Finish carpenters sometimes work to a thirty-second.
What does a negative answer mean?
The second measurement was longer than the first. The size of the difference is still right.
How do I enter inches only?
Leave the feet box empty. You can also type more than 12 in the inches box, such as 30 inches, and it will be handled correctly.
How we know this calculator is right
Before this calculator went on the site, 6 answers were worked out separately from its code, by hand or straight from the formula above. Each time this page loads, your own browser runs the calculator on those same numbers and compares. Turn on JavaScript to see the comparison.
See every check
| Numbers used | Result | Worked out separately | This calculator |
|---|
What this proves: the calculator does the arithmetic of the formula shown, correctly. What it cannot prove: your measurements, or figures such as coverage per bag, waste and spacing, which are typical starting values you can change. Go by the product label and your local code.