How the amount is worked out
Gallons = (walls + gables − doors − windows) × coats ÷ coverage per gallon
A worked example
A house with 140 feet of wall 9 feet high has 1,260 square feet of wall. Two gable ends add 225, and two doors and ten windows take out 192, leaving 1,293 square feet. Two coats at 300 square feet per gallon is 8.6 gallons, so you buy 9.
Good to know
- Trim, soffits, fascia and shutters are extra. As a rough guide, trim on an average house takes a gallon or two.
- Bare or chalky surfaces need primer first, which is a separate product.
- Buy five-gallon buckets for the body colour and mix them together so the colour is consistent round the house.
- Spraying uses noticeably more paint than brushing and rolling. Add 20% or more.
Common questions
How do I find the gable height?
Multiply half the gable width by the roof pitch over 12. The roof pitch calculator finds the pitch.
How we know this calculator is right
Before this calculator went on the site, 6 answers were worked out separately from its code, by hand or straight from the formula above. Each time this page loads, your own browser runs the calculator on those same numbers and compares. Turn on JavaScript to see the comparison.
See every check
| Numbers used | Result | Worked out separately | This calculator |
|---|
What this proves: the calculator does the arithmetic of the formula shown, correctly. What it cannot prove: your measurements, or figures such as coverage per bag, waste and spacing, which are typical starting values you can change. Go by the product label and your local code.