Every Single CalculatorOne place for every calculator

Raised bed soil calculator

Enter the size of a raised bed and how deep you are filling it to find how much soil to buy.

Example: A customer wants three 8 by 4 foot raised beds filled and you need to choose between bags and a bulk delivery.

Your numbers

Bagged garden soil commonly comes in 1, 1.5 and 2 cubic foot bags. Check the bag.

ft
ft
in
cu ft
Drawn from your numbers. It redraws as you type.
  • Soil needed0
  • In cubic yards0
  • Or in bags0
  • Planting area0

Raised bed soil calculator. Estimate from everysinglecalculator.com

Materials list
ItemBuyHow it was worked out

How the amount is worked out

Cubic feet = length × width × (depth ÷ 12) × number of beds

A worked example

A bed 8 by 4 feet filled 12 inches deep takes 32 cubic feet, which is 1.2 cubic yards or 22 bags of 1.5 cubic feet.

Good to know

  • Past about a cubic yard, a bulk delivery is usually far cheaper than bags.
  • Soil settles in the first few weeks. Fill a little over the top, or keep a couple of bags back to top up.
  • Most vegetables do well in 10 to 12 inches of soil. Root crops such as carrots want a little more.
  • A common fill is a mix of topsoil and compost. Ask your supplier for a raised bed or garden blend.

Common questions

Can I fill the bottom with something cheaper?

Yes. Logs, branches and leaves in the bottom third of a deep bed save soil and break down over time. Reduce the depth you enter to match.

How we know this calculator is right

Before this calculator went on the site, 9 answers were worked out separately from its code, by hand or straight from the formula above. Each time this page loads, your own browser runs the calculator on those same numbers and compares. Turn on JavaScript to see the comparison.

See every check
Numbers usedResultWorked out separatelyThis calculator

What this proves: the calculator does the arithmetic of the formula shown, correctly. What it cannot prove: your measurements, or figures such as coverage per bag, waste and spacing, which are typical starting values you can change. Go by the product label and your local code.

Used by: landscapers.