Every Single CalculatorOne place for every calculator

Horsepower and torque calculator

Horsepower from torque and RPM.

Example: A dyno sheet gives torque and you want the horsepower at the same RPM.

Your numbers

Horsepower and torque are always equal at 5,252 RPM.

ft-lb
RPM
  • Horsepower0
  • In kilowatts0

How it is worked out

Horsepower = torque × RPM ÷ 5,252

A worked example

An engine making 400 foot-pounds at 2,626 RPM makes 400 × 2,626 ÷ 5,252, which is 200 horsepower.

Good to know

  • To go the other way, torque = horsepower × 5,252 ÷ RPM.

How we know this calculator is right

Before this calculator went on the site, 3 answers were worked out separately from its code, by hand or straight from the formula above. Each time this page loads, your own browser runs the calculator on those same numbers and compares. Turn on JavaScript to see the comparison.

See every check
Numbers usedResultWorked out separatelyThis calculator

What this proves: the calculator does the arithmetic of the formula shown, correctly. What it cannot prove: your measurements, or figures such as coverage per bag, waste and spacing, which are typical starting values you can change. Go by the product label and your local code.

Used by: mechanics.