How the count is worked out
Square grid: plants = bed area × 144 ÷ spacing²
Triangular: plants = square grid figure × 1.155
A worked example
A bed 20 by 10 feet is 200 square feet. At 12 inches apart on a square grid that is 200 plants. Staggered in a triangular pattern it is 231. At 18 inches apart the square grid needs only 89.
Good to know
- Spacing on a plant tag is the mature width. Planting closer fills in sooner but crowds the plants later.
- Ground covers are usually sold in flats. Divide the plant count by the number in a flat.
- Keep plants back from the edge of the bed by half the spacing, so they do not spill onto paths or lawn.
Common questions
How do I work out an odd-shaped bed?
Find the area with the square footage calculator, then enter it as the length with a width of 1.
How we know this calculator is right
Before this calculator went on the site, 8 answers were worked out separately from its code, by hand or straight from the formula above. Each time this page loads, your own browser runs the calculator on those same numbers and compares. Turn on JavaScript to see the comparison.
See every check
| Numbers used | Result | Worked out separately | This calculator |
|---|
What this proves: the calculator does the arithmetic of the formula shown, correctly. What it cannot prove: your measurements, or figures such as coverage per bag, waste and spacing, which are typical starting values you can change. Go by the product label and your local code.