How it is worked out
Strips = bed width ÷ (roll width − overlap), rounded up
Rolls = strips × bed length ÷ roll length
A worked example
A 10 foot wide bed with 3 foot fabric lapped 6 inches needs 4 strips. At 50 feet long that is 200 feet, or 4 rolls.
Good to know
- Pin it every few feet with landscape staples, and at every seam.
- Fabric works best under stone. Under mulch, weeds root on top of it within a few years.
How we know this calculator is right
Before this calculator went on the site, 6 answers were worked out separately from its code, by hand or straight from the formula above. Each time this page loads, your own browser runs the calculator on those same numbers and compares. Turn on JavaScript to see the comparison.
See every check
| Numbers used | Result | Worked out separately | This calculator |
|---|
What this proves: the calculator does the arithmetic of the formula shown, correctly. What it cannot prove: your measurements, or figures such as coverage per bag, waste and spacing, which are typical starting values you can change. Go by the product label and your local code.